Yahoo Finance

Unidentified Company Representative

Thanks, Tom, and good morning, everybody. As Tom mentioned, we reported fiscal year 2024 fourth quarter sales of $367 million compared to $337 million in last year's fourth quarter. Total sales increased 8.9% over the fourth quarter of last year, with metal coating sales up 3.3% and pre-code metals up 13.4%.
Fourth quarter, gross profit was $81 million or 22.1% of sales compared with $61.3 million or 18.2% of sales in the prior year fourth quarter. Gross margins improved by 390 basis points as a result of lower zinc costs in the metal coating segment and lower overhead costs in the pre-cut metal segment as performance improved over a year ago period.
Also, gross profit benefited from reclassifying intangible asset amortization to our corporate center, partially offset by increased labor and other variable costs. Selling, General and Administrative expenses were $38.8 million in the fourth quarter compared with $25.1 million in the prior year fourth quarter.
The fourth quarter included $6.8 million in legal accruals related to the resolution of long outstanding commercial disputes. Excluding the fourth quarter legal accruals, SG&A expenses for the fiscal fourth quarter would have been $32 million, 8.7% of sales compared to 7.4% in the prior year fourth quarter.
Operating income was $42.3 million or 11.5% of sales, an improvement of 16.8% and 70 basis points from last year's fourth quarter of $36.2 million or 10.8% of sales. Interest expense for the fourth quarter was $24.7 million compared to $27.1 million in the prior year due to lower outstanding debt and repricing the company's term loan be and revolving credit facility late in the year. I will discuss our capital allocations efforts in a moment.
Equity and earnings of unconsolidated subsidiaries for the fourth quarter increased to $4.3 million compared to $1.6 million for the same quarter last year. The increase is due to higher minority interest earnings from our 40% ownership in the avail JV, as they continue to perform to expectation.
Current quarter income tax was $4.1 million, reflecting an effective tax rate of 18.7% in the quarter compared to 34.8% in the prior year fourth quarter where the rates were much higher due to the impact of the transformative M&A activities during the prior year.
Reported net income for the fourth quarter was $17.9 million compared to $7.4 million for the fourth quarter prior year. Adjusted net income for the fourth quarter was $27.5 million compared to $7.6 million in the prior year, up more than 2.5 times over the prior year.
Our adjusted diluted earnings per share of $0.93 as Tom spoke about compared to $0.30 in the prior year fourth quarter. Since the preferred convertible shares are diluted in the current quarter to adjusted EPS, the preferred dividends are added back to earnings for the company's adjusted EPS computation. Under a full conversion assumption, the preferred convertible shares, weighted average shares outstanding in the quarter, are approximately 29.5 million shares.
Fourth quarter adjusted EBITDA was $73.9 million or 20.2% of sales compared to $57.2 million or 17% of sales in the last year. The 320 basis points improvement in adjusted EBITDA margin was primarily driven by improved operational efficiencies in our pre-coat metal segment and continued strong earnings by our metal coating segment.
For the full fiscal year ending in February, our sales were just over $1.5 billion, up 16.2% over last year. The pre-cut results include 52 weeks of sales in the full fiscal year compared to only 42 weeks in the prior. Gross profit increased to $363 million or 23.6% of sales from a year ago, improving 120 basis points over the year ago gross margin on the same operational efficiencies I just spoke about during the fourth quarter.
SG&A costs were $141.9 million, 9.2% of sales on par with the SG&A as a percentage of sales from last year. Operating income was $221.6 million or 14.4% of sales or 130 basis points improved when compared to operating income of 13.1% of sales in the prior year.
Reported net income from continuing operations was $101.6 million for the year compared to $66.3 million last year. Adjusted net income was $132.8 million for the year or $4.53 per share compared to $95.2 million or [$336] per share last fiscal year, a solid 35% EPS improvement year-over-year.
Adjusted the EBITDA for the year was $333.6 million or 21.7% of sales compared to $267.4 million or 20.2% of sales in the prior fiscal year, which represents an increase in EBITDA dollars of 24.8% compared to the prior fiscal year.
I turn to our financial position and balance sheet now. We generate a strong cash flow from operations of $244.5 million and free cash flow of $149.3 million. As we executed on several working capital initiatives during the year. Our pre cash flow is computed as cash flows from operating activities less capital expenditures.
Capital expenditures for the year were $95.1 million including typical safety, maintenance, and gross spending, as well as approximately $47.7 million related to the new Greenfield aluminum coating plant under construction in Washington, Missouri. Tom will cover the project in a few moments.
In fiscal 25, we expect capital expenditures to be approximately $100 to $120 million, including $50 million to $60 million related to the Washington facility as we complete construction and ready the site for production.
We reduced debt during the year by $115 million exceeding the $75 million to $100 million target we provided as part of our annual guidance. Additionally, with our focus on working capital and strong overall debt reduction, we exceeded our originally stated leverage goal back in May of '22 by reaching a debt -- net leverage ratio of 2.9 times with a target of getting under 3.
In addition, during the last year, we successfully repriced our term loan B twice and repriced our $400 million revolving credit facility, repricing the term loan B in August '23 and again in March '24. Each time reducing our margin by 50 basis points for a total 1% point reduction.
Additionally, we repriced our revolving credit facility in December 2023, which moved us from a fixed sulfar rate of [sour] plus 425 margin to a tiered pricing grid at February '24 with our year-end leverage ratio being below 3. We expect our go forward revolving credit rate to be margin of sour plus 275 or another 25 basis points reduction in margin.
In addition, we are pleased to share that S&P Global upgraded our senior secured debt rating from BB minus 2B from B, a two-notch increase, and Fitch ratings initiated coverage on the company with a very similar rating.
Acknowledging the progress, we have made since the acquisition of pre-cut metals in May of 2022. Our capital structure provides a strong foundation as we move forward, and our liquidity position remains strong with no debt maturities until 2027. We continue to be under a swap agreement that fixes more than half the variable rate debt.
Finally, we pay cash dividends on common and preferred stock totaling $31.4 million for the year. We made no share repurchases during the year since we focused on debt reduction. With that, I'd like to turn the call over to David Nark.

David Nark

Thank you, Philip. Good morning, everyone. Tom began today's discussion by describing AZZ's number one market position in [to] highly differentiated value added metal coating segments that provide scale, expertise, and customer centric technology uniquely positioned to serve the North American steel and aluminum markets.
Our services provide sustainable, environmentally friendly solutions that extend the life of our customers' products through our specialized coding materials process. Our business is well positioned to benefit from secular growth drivers related to infrastructure and renewables investments, restoring the US and North American manufacturing, as well as important conversions from plastics to aluminum.
Looking back at our fiscal fourth quarter, which concluded in February, both segments benefited from unseasonably warmer weather that favorably impacted the construction industry. Regarding our end markets, metal coatings was supported by robust transmission and distribution activity and a continued ramp of interstate bridge and highway projects in the quarter.
We continue to see beneficial tailwinds associated with critical infrastructure projects closely tied to the AIIJA and [CHISAs] which positively impact our results. We are seeing signs of a ramp up in the cadence of federal funding as evidenced by the uptick in award announcements by the Departments of Energy, commerce, and Transportation.
We believe infrastructure monies are flowing in 2024, and that DOT budgets are available in all 50 states. Going forward, we expect an elevated number of projects related to TND, bridge and highway, data centers, and chip plant work in our future quarters.
Within TND, we are encouraged by the US Department of Energy's October announcement of up to $3.5 billion in grid resilience and innovation partnership program investments for 58 projects across 44 states to strengthen electric grid resilience and reliability across America.
16 of these projects specifically relate to grid resilience, which is where hot dip galvanized steel is commonly used. Within bridge and highway, we are encouraged by the announcement this January of more than $4.9 billion in funding by the Department of Transportation for 37 different infrastructure projects.
In the manufacturing sector, the administration announced up to $8.5 billion in direct funding and $11 billion in loans to Intel for the construction of computer chip plants in Arizona, Ohio, New Mexico, and Oregon. And as recently as last week, the administration announced up to $6.4 billion in direct funding for Samsung Electronics to develop computer chip manufacturing and a research cluster here in Texas.
Samsung's Texas manufacturing cluster will include two factories as well as an R&D facility and packaging facility. The first facility is expected to be operational in 2026, with the second being operational in 2027. Both Intel and Samsung are projects that we either have or are currently actively providing hot dip galvanizing or coil coating solutions.
Lastly, we continue to see a slight rebound from solar and renewables and markets with pockets of regional strength across the United States, where nearly $17 billion in planned investments have been announced so far.
The pre-coat metal segment continued to perform better than the market in the fourth quarter, with growing volumes based on conversion selling and value pricing. Volume gains, a slight market rebound, and favorable mix helped our fourth quarter performance, especially in the construction and appliances categories.
Freco continued to win captive paint lines and coil cutting projects from companies that decided to outsource these services. Although smaller volumes, the container and transportation categories continue to be under some pressure in the quarter offset by the construction spending increases. Projections for calendar 2024 construction spending call for significant year-over-year improvements, which include public construction projects, private nonresidential spending, and higher manufacturing construction compared to the last year.
Non-residential construction continues to perform well with building strength in manufacturing and agriculture. As you saw from our raise guidance, we remain optimistic about the long-term expectations for manufacturing, reshoring, and the transition to pre-painted steel and aluminum.
We also see a steady movement from plastics to aluminum in the container category throughout North America. Our metal coatings and pre-coat metals teams continue to make solid progress with incremental market share gains with new customers in both our hot dip galvanizing and coil coating business.
With that, I'd like to turn it back over to Tom.

Thomas Ferguson

Thanks, Dave. Fiscal 2024 was a pivotal year for the company. Our AZZ teams continued to drive the strategy forward by focusing on serving customers well, improving our operations, and prudently deploying cash on high return projects throughout fiscal 2024.
I'm proud of our leaders who demonstrated both pride and passion as they drove organic growth and improved operational efficiencies to further enhance margins while we collectively strengthened the company's financial position.
The company generated significant cash from operations and paid down debt ahead of expectations. We ended the year with our net debt to trailing EBITDA 2.92 times, which is a testament to our cash management discipline last year.
As well as our ability to grow adjusted EBITDA by 25% to $334 million. We continue to build trust with our customers as we partner with them to provide superior quality and service levels. Our business segments provide important sustainable metal coating solutions that enhance the longevity and appearance of buildings, products, and infrastructure essential to everyday life. We enjoy the fact that our solutions and services are synonymous with sustainability.
As Dave mentioned, our business outlook is positive, particularly as we enter the spring and summer months when construction activity is at its strongest. Our teams are positioned to find new ways to grow market share and benefit from the expected ramp up of infrastructure spending.
Given AZZ's strong market positions in both segments are broad scale and our strategic footprint, we believe we are well positioned for however the economy shapes up this year. Labor and employee turnover continues to improve from a year ago.
Since we are a tolling business, we will remain nimble and adjust inventories of paint and zinc if demand shifts, whether due to our growth initiatives or other macroeconomic impacts. Our Greenfield aluminum coating -- coil coating facility in Missouri is progressing well and tracking on schedule.
Work has shifted to the inside of the building with the electrical installation underway and the installation of the coating line and process. Our focus is now turning to our staffing commission and qualification efforts. It's exciting to think that our hot testing of the coding line will begin in the third quarter just a few months from now.
We raised our guidance a couple of weeks ago and are reiterating it today. Our fiscal 2025 guidance is for sales in the $1.525 billion to $1.625 billion range, adjusted EA in the $310 million to $360 million range, and adjusted EPS guidance of $4.50 to $5. Capital expenditures for the current fiscal year are expected to remain unchanged at $100 million to $120 million including $50 to $60 million. Related to the new Washington, Missouri plant.
The equity and earnings from our minority interest in the joint ventures expected to be $15 million to $18 million this year, and debt reduction is planned in the $60 million to $90 million range. While we will remain focused on paying down debt, we are seeing some small galvanizing acquisition opportunities beginning to enter the pipeline. Our dedicated teams are operating confidently as we begin the new fiscal year, and I want to thank them for their hard work and accomplishments this past year.
We are energized as we find ourselves already halfway through our first quarter and believe we are well positioned to deliver strong results, generate significant cash flow, and maximize shareholder value in fiscal 2025.
Now, would the operator please open up the call for questions.

Question and Answer Session

Operator

(Operator Instructions)
Lucas Pipes, B Riley Securities.

Lucas Pipes

Thank you very much, operator. Good morning, everyone. My first question is on the balance sheet. Good job there getting the leverage ratio at 2.9 times and I wondered with this, do you plan to maybe hold a little bit more cash on the balance sheet and do you think about acquisitions and if so, where do you see more opportunities on the pre-code side or on the metal coding side? Thank you very much.

Unidentified Company Representative

I can start, Tom, with the balance sheet question. Typically what we've done is we operate pretty low cash balances and use excess cash to reduce the borrowings on the revolver. We have $400 million revolver with about $355 million in capacity at the end of the year, so the acquisitions Tom was speaking to, we should be able to fund smaller on through the revolving credit facility. Tom?

Thomas Ferguson

Yeah, Lucas, I think, right now what we're seeing is there's a couple of potential galvanizing opportunities that have popped up that, the kind of bolt on one-off sites that our team likes to look at. No idea how active those will be, but, we would fund those off of the revolver and, but naturally we'd have -- we'd expect to have goody bit dies above our multiple, so.

Lucas Pipes

Got it. And when you mentioned Bolt on, up to what level would you consider EBITDA or volume would you consider bolt on. I'm just trying to get a sense for kind of what --

Thomas Ferguson

These are typically in the $10 million to $20 million revenue side. So usually they're going to have say 3 or 4, well, yeah, probably $3 million or $4 million of EBITDA. We tend to pay roughly 6 times. So that's what we consider bolt on. And then our team, we anticipate good strong first-year synergies often in the 500,000 basis points improvement range.

Lucas Pipes

Very helpful. And for this fiscal year here, how many of those do you think are realistic to tuck in?

Thomas Ferguson

There hadn't been any. Last year, of course, we, we've taken the flag down that we were out there, in acquisition mode. So I think we've kind of let folks know that as we've gotten our debt under 3 times quicker than we'd anticipated, that while we're still going to be focused on paying down debt, funding the facility in Washington and our normal CapEx needs. So we just recently kind of let it out that we're interested again.
These usually have 4 month to 6 month, cycle times from when they become active to when we're able to do diligence and close. So maybe 1 or 2, That'd be about it.

Lucas Pipes

That's very helpful. And maybe just to round out the conversation on growth. Do you think about kind of organic growth, where was that factor in via the some of these bolt bonds you mentioned. Thank you.

Thomas Ferguson

Yeah, I think we still -- our normal organic growth, particularly on the metal coating side tends to run with GDP. So when we can get a couple of acquisitions, that's going to add another 5% or 6% on a full year run rate basis.
On the pre-code side, we've got two things going on. One, we feel volumes are improving as we saw in the fourth quarter. I believe we were up about 9% on volume. So we're seeing the volumes pick up on the pre-code side, which gives us nice organic growth. And then as we get into next year, finish out this year, get into the next calendar year, that's when we'll start to have the Washington site coming online. So what's to provide some additional revenue and EBITDA growth.

Lucas Pipes

Gentlemen, very helpful. I appreciate all the color and continue. Best of luck.

Thomas Ferguson

Thanks.

Operator

John Franzreb, Siodi and Company.

John Franzreb

Good morning, guys, and congratulations on another good quarter. I'd like to start with the revenue profile in the fourth quarter. You suggested there was -- it was unusually warmed and unseasonal basis. I'm wondering two things. Does that suggest a -- that, business was pulled from the first quarter into the fourth quarter, and B, if that was the case, that suggests that maintaining guidance is actually more of a positive thing because you're able to backfill some of that revenue.

Thomas Ferguson

That's a good point, John. I think on the metal coating side, yeah, getting an earlier start. It kind of depends on what, yeah, so it -- we did see some of that pull in and stay active. Hopefully, there's some additional projects that come in the pipeline as the as the summer as we get into the summer months and in the fall.
And then on the pre-code side, that's the normal ordering cycle, so the construction ramp up. I would -- I'm not sure a whole lot pulled in from first quarter, but, potentially a little bit in terms of inventory buildup among some of our customers. So yeah, we feel like the guidance is solid and then and as traditionally, we try to be conservative. And then I'll continue to update that as the year goes on.

John Franzreb

Fair enough. And you also mentioned in the press release there was market share gains on the pre-code side. Can you talk a little bit about the market share gains and where you're getting them from?

David Nark

Yeah, John, this is Dave. I think as you look at it, there's a couple of areas in the end markets where we're seeing some improvement. We believe we're outperforming the market in the construction segment. Also in the appliance market is another area where we're outperforming and seeing some conversions taking place. So those are the two main areas I'd point to.

John Franzreb

Okay, one last question and I'll get back into. You talk about pricing initiatives on the metal coding side of the business benefited the quarter. Can you go a little bit deeper on that? Is that in response to zinc prices can -- what's going on in the pricing initiative front and on the MC?

Thomas Ferguson

Yeah, I think -- we've always tried to talk about how we have tried to differentiate our value pricing versus zinc, but it does help. Zinc has been trending up and so as zinc trends up, that tends to help support our price levels.
I also think that, we continue to add services and anywhere from adding more transportation so that we're able to be more responsive, but that also adds basically just revenue and flow through income and increases our price per 100 weight, if you will. So I think all those things have -- they bode well. We also have improved. We added another spin line, late last year. So we're getting the benefit of that, and that tends to be at a higher price per 100 weight, actually tends to be priced per piece. So those are all things that have benefited us and we hope to continue to benefit from as we go forward this year.

John Franzreb

Great. Thanks for the additional color. I'll get back into queue.

Thomas Ferguson

Thanks.

Operator

Adam Thalheimer, Thompson Davis.

Adam Thalhimer

Hey guys, congrats on a strong quarter and, Philip, congrats on your retirement.

Unidentified Company Representative

Thank you.

Adam Thalhimer

And metal coatings, so your gross margins were up 170 basis points in fiscal '24. Curious how that might trend in fiscal '25 if there's room for more improvement?

Thomas Ferguson

I think that we talk a lot about DGS and the leadership teams and our playbooks. We believe we are benefiting from that, and then we should continue to benefit and hopefully, hold those marginal improvements and continue to benefit from the various [strategy] or tactics that we're using. So we feel pretty confident with the team and as long as we -- as long as volumes hold up, I believe we can drive those margins.

Adam Thalhimer

Okay, and then at pre code, is this normal seasonality between November and February, or sounded like you also just had a really good quarter in pre-code in February?

Thomas Ferguson

We did. So part of this is, yeah, it was a lighter winter than normal, but, also, I think just -- we had mentioned last 4th quarter where we were carrying a lot of customer inventory, and we cleaned that out as we got into the fiscal year. Good operating performance by the team in pre-code.
And then, so this fourth quarter, I think it was the benefit of kind of normal customer inventory sitting in our facilities, which allows us to drive productivity and efficiency, and then the volume just, we start to start to get when volume flows through those margins tend to pop nicely.

Adam Thalhimer

Okay. And then do you guys have a -- like an actual interest expense and tax rate forecast that's embedded in the guidance?

Unidentified Company Representative

We do. I mean, we look at the forward curve on our interest rates, so just like everybody else, yeah, out there we're expecting 4 to 6 cuts this year. Then we got out there and we're able to reprice here in March '24, which wouldn't have been part of our original forecast.

Thomas Ferguson

Well, we don't have cuts factored in.

Unidentified Company Representative

We have the -- Just the additional cuts. And then on the tax rate, we have a 21% (inaudible) rate and then we're primarily North America, so call it 3, 3.3, -- 3% to 4%. So that's kind of 23.5% to 24% tax rate is what we utilize.

Adam Thalhimer

Okay, I'll turn it over. Thank you.

Operator

John Bratz, Kansas City Capital.

Jon Braatz

Good morning, everyone.

Thomas Ferguson

Good morning, John.

Jon Braatz

Tom, I can talk a little bit about Washington, Missouri. As you ramp up, what can you say about maybe startup costs, cost you're absorbing, prior to production, and is there a little bit of a drag on margins for this fiscal year?

Thomas Ferguson

No, there shouldn't be. I think we, we've got all that planned in our budgets for how we're going to ramp up, and naturally we've got a little bit of contingency in there too. So we've got some decisions to make as the line gets tested out and comes online whether we actually start producing at the end of the year or whether we just carry in and meet the normal customer demand that's been committed. So -- but in either case, I don't look for that to be a drag. So it should be --

Jon Braatz

Okay. And how much of production is committed at this point?

Thomas Ferguson

75% is contractually committed, and that's kind of how we -- what that is how we've built the model and in fact, that end, so we've got 25% to go sell, although in this case there's the customer that made that commitment, actually would have liked to have had a 100% of it. So we've got upside with this customer, which we hope to announce here in the next month or so. And then secondly, there's, it does give us the opportunity to go chase some other business which I always like having that ability to do that.

Jon Braatz

At the most, what would you like to see committed by one customer? You're 75% now. I mean, would you be okay at 85%, 90%?

Thomas Ferguson

Yeah, I think so. I always hesitate to get that dependent on one customer, but in this case, because it's a seven year contractual arrangement. I'm less concerned, so to speak, and obviously with that much business. We do have another plant in in Saint Louis that does -- it's a smaller capability, but we do have another aluminum line, well, too, actually. So we do have that opportunity to pick up business and make sure that we balance it between both plants.

Jon Braatz

Sure. Okay. Thank you very much.

Operator

This concludes our question and answer session. I would like to turn the conference back over to Tom Ferguson for any closing remarks.

Thomas Ferguson

Thank you for your time today. As you can tell, we're excited about our future and I look forward to updating you on our first quarter results in just a few months.

Operator

The conference has now concluded. Thank you for attending today's presentation. You may now disconnect.